Port Forwarding IP Cameras with Codetel/Claro Modem/Router

SantiagoDR

The "REAL" SantiagoDR
Jan 12, 2006
5,808
948
113
Define a Gaming Service with the ?Port Number? the IP Camera is using
in the Game & Application Sharing section of the Router.

In this example my IP Camera is using Port 6100 and I call the Service ?WebCamera?

Then go to the list of devices on the router and assign that Gaming Service (WebCamera) to the IP Camera device.

That?s all that needs to be done using the Claro Modem/Router, in my case, the Thompson TG580.
NOTE: I chose IP address 10.0.0.80 to be my Camera?s IP Address.

Camera (Name of Computer/Device - It may show as: Unknown followed by it?s MAC address)

? Information

Status:Active

Type:Generic Device

Connected To:

? Addressing

Physical Address:xx:xx:xx:xx:xx:xx (MAC Address)

IP Address Assignment:Static

IP Address:10.0.0.80

? Connection Sharing

Game or Service

WebCamera


- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

WebCamera
? Game or Application Definition

A game or application is made of one or more TCP/UDP port ranges. Each incoming port range can be translated into a different internal (local network) port range. Port ranges can be statically assigned to devices or dynamically assigned using an outgoing trigger.

Protocol: TCP
Port Range: 6100-6100
Translate To: 6100-6100
Trigger Protocol : -
Trigger Port: -


SantiagoDR
 
  • Like
Reactions: waytogo