Results 1 to 6 of 6
  1. #1
    Regular
    Join Date
    Sep 2005
    Posts
    52
    Post Thanks / Like

    Default Who sells KILZ sealant paint or Shellacaround Sosua?

    I've been advised to seal wood knots with KILZ paint or Shellac.Does anyone know for sure who sells either please, around the Sosua or Puerto Plata area?Thanks

  2. #2
    Gold
    Join Date
    May 2006
    Posts
    9,821
    Post Thanks / Like

    Default

    Maybe you can ask at the hardware store for something made for the knots? Maybe someone can help you with the Spanish for that. Copy down a phrase if you need to. How do you say wood knot in Spanish?

  3. #3
    Bronze
    Join Date
    Mar 2005
    Posts
    1,636
    Post Thanks / Like

    Default

    El woodo knoto?

  4. #4
    Gold
    Join Date
    May 2005
    Posts
    7,376
    Post Thanks / Like

    Default

    Quote Originally Posted by domrepadmirer View Post
    I've been advised to seal wood knots with KILZ paint or Shellac.Does anyone know for sure who sells either please, around the Sosua or Puerto Plata area?Thanks
    Read this article first. Latex KILZ won't do the trick.

    Priming and Sealing Wood Knots

    Knots in wood have a high concentration of resin. This resinous substance will migrate into and discolor a paint film unless it is blocked by a sealer. Knot sealers act as an impervious barrier to prevent the migration of the resin.

    Usually with age, knot bleeding becomes less of a problem, nevertheless, knots should always be spot-primed with a knot sealer, regardless. It will always be a challenge to block out knot bleed in very green wood. Some knots will not only discolor the paint, but will actually cause the paint to peel because the resin actually oozes out from the knot, pushing the paint off.

    Knot Sealers: What doesn’t work

    Latex stain blockers

    Latex primers are great for total surface priming. They are flexible and breathable and will allow moisture vapor to pass through them. The relative porosity of the latex primer makes them unusable as a knot sealer.

    Oil based stain blockers

    Exterior oil-based primers are a good blend of flexibility and stain blocking, while remaining slightly breathable. They are my first choice for total exterior primer. Oil-based primers are better than acrylic latex primers for stain-blocking, but still not very effective for sealing wood knots.


    What Works

    Shellac as a knot sealer

    Shellac comes in clear, amber (or “orange”), or white pigmented versions. The standard knot-sealer that has been used over the years is amber or orange shellac. I presume that the addition of pigment (as in white shellac primer) may slightly reduce the knot-sealing capability of shellac. The problem with un-pigmented amber shellac is that, like most clear-coats, many paints (and even some primers) will not adhere very strongly to a clear-coat. This problem can be solved by transitioning from un-pigmented shellac to an intermediate “tie coat” of pigmented shellac, which can be re-coated by any primer or paint.

    Two coats are often needed to seal knot-bleed, and, in some isolated problematic knots, even two coats will not prevent bleeding over time. Because shellac is brittle and impervious to moisture vapor transmission, it is not suitable as a total primer for exterior use. With exterior knot-sealing, you must only spot prime the knot itself, while on interior wood, as a rule, you may prime the substrate in total, with a few exceptions.
    The need for a total primer

    The sealing qualities of shellac necessitates a subsequent total primer coat over the top in order to achieve paint uniformity when used as a spot primer (as with all exterior knot sealing). Failure to do so will result in a spotted, blotching looking painted surface. The spot-primed knots will look shinier and whiter than the unprimed areas. The way to avoid this potential problem is to prime the entire surface in total with a universal primer/sealer prior to finish, coating after spot priming and sealing the knots.


    Knot sealing systems (spot priming)

    Good: Two coats (spot prime) of white pigmented shellac

    Best: Two coats (spot prime) of clear amber shellac followed by one coat (spot prime) of white pigmented shellac (this will add pigment to help transition to the next full primer/sealer coat)

    Follow up after this spot-priming of the knots with a total coat of an interior/exterior universal primer/sealer. This primer coat can be tinted to approximate or match the finish paint color

    Recommended Total Surface Universal Primer / Sealers

    Zinsser Coverstain or 123 Bullseye

    Xim 400 white or UMA primer

    Zinsser BIN (interior only total surface priming)

    Use the oil (Xim 400 and Coverstain) and shellac (BIN) primers with good ventilation during and after priming.

    Oozing knots

    You must prepare the knot for primer by first removing any oozing sap by scraping, then wiping with mineral spirits, then sanding.

    Stubborn cases

    Some knots and some woods that are very resinous will bleed until they dry out with time.

  5. #5
    Regular
    Join Date
    Sep 2005
    Posts
    52
    Post Thanks / Like

    Default

    Thankyou very much for this reply.It's very helpful.
    I have my place in Sosua.Where can my cabinet maker buy Shellac please?I need to know a stockist,so I don't waste his time.Thanks

  6. #6
    Gold
    Join Date
    Dec 2011
    Posts
    7,861
    Post Thanks / Like

    Default

    Quote Originally Posted by PeterInBrat View Post
    Maybe you can ask at the hardware store for something made for the knots? Maybe someone can help you with the Spanish for that. Copy down a phrase if you need to. How do you say wood knot in Spanish?
    They're called nudos.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •