Results 1 to 4 of 4
  1. #1
    Newbie
    Join Date
    Mar 2004
    Posts
    2
    Post Thanks / Like

    Default European Electric Appliances

    Is there an easy way to use or convert my European electric appliances to the DR voltage?

  2. #2
    Honorificabilitudinitatibus
    Join Date
    Apr 2002
    Posts
    13,844
    Post Thanks / Like

    Default Conversion

    Quote Originally Posted by BIBI1968
    Is there an easy way to use or convert my European electric appliances to the DR voltage?
    You can buy transformers that will step up the 110/120 volts here to 220/240 for your appliances. You must buy a unit with sufficient amperage for the appliance in question.
    Electronics such as TV's, VCR's and video cams use a different broadcast system than we do here, and although you could get them to work here with a transformer, they will only work in conjunction with your own equipment.
    Most European TV's use either Pal or Secam broadcasting systems, whereas we use NTSC.

  3. #3
    Regular
    Join Date
    May 2002
    Posts
    25
    Post Thanks / Like

    Default You can get 220V in the DR

    Hi,

    I have a little experience in this

    Almost everywhere you can get 220 V 60 HZ. Which means that a lot of things will work:
    -coffemakers, anything that depends on making something hot etc Yes:
    -clocks: questionable, because frequency is off
    -radio, computers: yes
    -tv. video: depending if you bought a "multisystem" --> because of the difference between ntsc ad pal or secam.
    -powertools--> most probably yes.

    furthermore: in a lot of places the voltage drops below what it should be.
    people then make "reductor" to ramp up (e.g. from 90 to 110) or down
    e.g. from (180 to 110) the voltage.

    This seems a good hack but because these are mostly "transformers" and not electronic voltage regulaters everything is off again if the voltage "coming from the street" is not stable.

    there are however solutions...

    Tom

  4. #4
    Rest in peace Amigo!
    Join Date
    Aug 2002
    Posts
    2,437
    Post Thanks / Like

    Default Hi Tom,

    Greetings from Atlantic Canada.

    Since you asked for easy - here goes.

    Buy a step-up transformer like one of these http://www.tlc-direct.co.uk/Main_Ind...ter/index.html

    They are all the same except they put out different amounts of power, depending on what type of appliance you want to run.

    You may need an adapter like J3 in this picture www.action-electronics.com/grc/phac2.jpg If the adapter is polarized (one prong wider than the other) you would then need a polarized to non-polarized adapter OR you could do as I did and file the wider prong to be the same width as the other prong.

    Gregg

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •