Plasmas & LCD screens are the new kids on the block. The tube TVs are literally going "down the tubes". This new technology uses state of the art electronic components, real sensitive stuff. I am hearing some initial reports from people having problems when running their plasmas off the inverters.
The vast majority in the DR is using the DR 3624 Trace inverters. The output
of these inverters is modified sine wave power which is known to cause a humming noise on ceiling fans and some problems when connected to motion detectors, alarm systems etc.
A friend of mine noted that his plasma TV screen has fine horizontal lines accross ( left to right) and some audio noise at times. Another guy had to repair the main high voltage input module when the ventilation fan stop working.
Anyone else has any problems with plasmas? I would like to read your reports about this before I decide to buy one my self. Thanks.
The vast majority in the DR is using the DR 3624 Trace inverters. The output
of these inverters is modified sine wave power which is known to cause a humming noise on ceiling fans and some problems when connected to motion detectors, alarm systems etc.
A friend of mine noted that his plasma TV screen has fine horizontal lines accross ( left to right) and some audio noise at times. Another guy had to repair the main high voltage input module when the ventilation fan stop working.
Anyone else has any problems with plasmas? I would like to read your reports about this before I decide to buy one my self. Thanks.