NFusion satellite receiver

[webmacon]

International Channels not on Echo7

I already had the circular LNB installed in order to get the international channels via Anik F3 and this worked all right.

However, when I scanned all the satellites (EchoStar 7,8, 10 and Anik F3) again the other day all the international channels were listed under EchoStar 7 on 119? W.

Subsequently I deleted the Anik F3 satellite from my installation set up as I feel that I don't need it any more.

Of course I did not need to realign the dish as it had always been receiving from 110/119/118.8?...

m'frog

MF
Ok, since you had the Low Frequence LNB and had Anik3 TP's already in your box that's why you got them again under Echo7, but it's actually still Anik3.

When I install a Low Frequence LNB then I just add one of the many TP's of Anik3 to the list of Echo7 and scan it, once the receiver finds one then it will add the rest by itself. So of course going for example to ProSiebenSat it will show me Echo7, but actually it doesn't matter what Sta name is shown because I could also rename it to something totally different but the programming is still from Anik F3.

Some people believe when they play around and make blind scans that they get more channels because after that they see channels with very different Sat names, fact is that some of these Sats have the same TP frequencies and that's why the frequency is getting scanned again, but will still bring only the channels from the sat where your parabola is pointed to with that frequncy.

Actually it doesn't matter as long we have Free TV, just wanted to make sure we are on the same page.

Regards,
MZ

 

[georgios]

NFusion down for a few hours...

NFusion went down last night for a few hours due to a massive ECM unleashed by DN & BEV. I left the receiver on and watched a couple of movies on DVD. The receiver updated it self, re-booted and got back on line a
Didn't have to lift a finger...

Georgios

 

[mountainfrog]

FTA Hobby

NFusion went down last night for a few hours due to a massive ECM unleashed by DN & BEV. I left the receiver on and watched a couple of movies on DVD. The receiver updated it self, re-booted and got back on line a
Didn't have to lift a finger...

I have thought about getting a Nfusion receiver because of this self updating feature via the internet.
But, of course, the receiver needs to be connected to an internet source permanently and this is where the problem lies.
I for one do not want to keep my internet connection on for 24 hours/day. (Other people may even not have a permanent service.)

It's somehow convincing that many users believe that the Nfusion technology is the future of the FTA hobby....

Fortunately, after this latest ECM other receivers were also up again after a few hours.

m'frog

 

[TandMZ]

NFusion is free just like the other FTA receivers. You do need a satellite dish
to obtain the signal. 4000 channels is correct... all free, including PPV, sports, news, movies, adult, international, kids, educational etc. Just to clarify again, you get all the PPV without having to pay for it.

Georgios[/QUOTE]

How does TV fare in DR for hardcore American football fans? The one thing I am sure to truley miss once we move there, is my Steelers on TV!

T

 

[georgios]

Football diehards...

NFusion is free just like the other FTA receivers. You do need a satellite dish
to obtain the signal. 4000 channels is correct... all free, including PPV, sports, news, movies, adult, international, kids, educational etc. Just to clarify again, you get all the PPV without having to pay for it.

Georgios

How does TV fare in DR for hardcore American football fans? The one thing I am sure to truley miss once we move there, is my Steelers on TV!

T[/QUOTE]

The Steelers are always exiting to watch, I agree.
FTA receivers will decode ALL football events on the tube live, including your favorite team, the Pittsburgh Steelers.

Georgios

 

[Eddy]

I have been advised to stay away from NFusion. Big brother can trace you IP and stop by to visit. Especially on the main land.

 

[Buzzard]

no yahoo.com's need apply

Here is a great resource for the Nfusion reciever.

Nfusion Forum - Register

The NFUSION Rocks!!

If you register for the forum please use me as a reference. Minjn

The wouldn't accept my registration, due to my yahoo.com email address!

 

[georgios]

NFusion rules

The wouldn't accept my registration, due to my yahoo.com email address!

Yahoo & Hotmail addresses are filtered. Did you try Gmail?
Georgios

 

[Munir]

Help!!!!!!

hello,
I just bought nfusion receiver and i don't know how it works or how we get it started. I want somebody's help because i really don't know any thing about this receiver. Also, I am having a hard time installing the CD in my computer.I would be very grateful if somebody guides me. Thank you

 

[Munir]

Help!!!!!!

hello,
I just bought nfusion receiver and i don't know how it works or how we get it started. I want somebody's help because i really don't know anything about this receiver. Also, I am having a hard time installing the CD in my computer.I would be very gratefull if somebody guides me. Thank you

 

[georgios]

Nfusion help

Go to Nfusion Forums Official FTA Site
Register and read "newbies" or "how to guides"
Georgios

 

[Munir]

downloader

Go to Nfusion Forums Official FTA Site
Register and read "newbies" or "how to guides"
Georgios

it says that they are sorry and they cannot register any account at this time.
I downloaded "Nfusion step by step for newbie" from a website. it is a good guide for the receivers, but im still havin' problems, it tells me to download the file and i have the right file but i guess i don't have the right downloader (nfusion v1.0) the downloader that i have is "Nfusion uploader 131". Can you help me for the right downloader or file???? That would be very nice of you.thank you.

 

[Munir]

hey i got an account for that website n i saved all those files they told me to. i read "step by step for newbies" but when i go to main menu on my receiver i totally get the oppsite of what they tell me in the "newbies". Also, i still can't find the file that i have to download.By the way i got the uploader. Thanks

 

[georgios]

NFusion virgin set-up

Instructions to NFusion start-up.

OPEN A NEW FOLDER ON YOUR DESKTOP.

1. Get uploader 131 from here Nfusion Forum

2. Get factory U27, boot v130 and bin 145.2 from here Nfusion Forum

3. Extract files using winrar free download here winrar software downloads and reviews at Download.com

4. Connect receiver to computer using the RS 232 cable found in the NFusion package box.

5. Open loader, choose correct COM port, click "open file", browse for factory U27. Click startNFusing, turn receiver off and back on to begin download.

6. Do the same for the boot V130.

7. Repeat for bin 145.2

Connect receiver to TV. Plug in the internet ethernet cable, satellite cable and audio/video wires.

DO FACTORY DEFAULT USING THE REMOTE CONTROL

Then press menu, installation, settings and "lock" your sats. Press "scan all channels" to download all TV & radio channels to your NFusion receiver.

Press guide and the blue button to update the EPG.

Enjoy...

Georgios

 

[georgios]

NFusion serial cable loader

Link Nfusion Forum

I always use this loader... it works fine.
Georgios

 

[Conchman]

My Nfusion box was working fine the first 3 weeks then all of a sudden now the electronic guide does not work anymore (does not list programs only channels), plus when I scroll through channels on the guide the picture goes out and the box resets itself (turns on and off).

Does anybody have a similar problem or does someone know how to fix it?

 

[georgios]

EPG update

My Nfusion box was working fine the first 3 weeks then all of a sudden now the electronic guide does not work anymore (does not list programs only channels), plus when I scroll through channels on the guide the picture goes out and the box resets itself (turns on and off).

Does anybody have a similar problem or does someone know how to fix it?

Which bin are you running?
The latest is 145.2. Install it ASAP.
Use webloader to load new bins into Nfusion receiver without the need of a serial cable. Locate the NFusion IP address and login. Use Network magic to locate NFusion IP address of your home network.Read more instructions
at the NFUsion website. No need to disconnect all the wiring any more.


After installing the new bin 145.2 DO A FACTORY RESET using your remote control.
Re-scan all sats. Turn off Emulator.Turn off AUTO EPG update. Press guide, press blue button. Do a manual EPG update every 2 days.
The EPG should download the channel programming.

Note. EPG means Electronic Programming Guide.

Georgios

 

[Conchman]

Which bin are you running?
The latest is 145.2. Install it ASAP.
Use webloader to load new bins into Nfusion receiver without the need of a serial cable. Locate the NFusion IP address and login. Use Network magic to locate NFusion IP address of your home network.Read more instructions
at the NFUsion website. No need to disconnect all the wiring any more.


After installing the new bin 145.2 DO A FACTORY RESET using your remote control.
Re-scan all sats. Turn off Emulator.Turn off AUTO EPG update. Press guide, press blue button. Do a manual EPG update every 2 days.
The EPG should download the channel programming.

Note. EPG means Electronic Programming Guide.

Georgios

I am sorry I am a bit of an idiot when it comes to this technology. I do not install bins, my receiver is hooked up to the internet and it downloads them automatically. Should I still try a 'Factory Reset'?

 

[georgios]

Factory reset

I am sorry I am a bit of an idiot when it comes to this technology. I do not install bins, my receiver is hooked up to the internet and it downloads them automatically. Should I still try a 'Factory Reset'?

You can do a factory reset but you must do a re-scan of the satellites to download the channels again. After the factory reset just go to menu, installation, settings and "commit" your sats at the proper switch. Then, when "lock" appears press "search all channels". That's it. The password is 0000

Go to Nfusion Forums Official FTA Site to learn how to install new bins. This is a must.
Generally, you should know what you are doing PRIOR to playing around with the receiver's software. The internet connection updates the codes every 3 minutes (in the background). No new bins are installed automatically off the internet connection.

Georgios

 

[Conchman]

I think I will just let my satellite guy handle this, as long as it does not need to be done every week. So far, I only needed him once in 3 months which is a huge improvement over the cardless receivers where he had to come twice per week and I was still out of service inbetween sometimes. I just don't have the time to learn this technology, well thats my excuse and I'm sticking to it.