We need an expert opinion on our roof. We are currently building a new home in Sosua and our builder states that it is normal for water to run between the tiles and the concrete sub roof. We noticed on the fascia that water is seeping through the concrete that has filled the convex shape under the Spanish tile. Now, this water is running consistantly around the whole house.
We don't believe this is normal and one of two things has happened. The over lap of the tiles wasn't enough. Currently the overlap is 3 inches. Or the tile is too porous and is absorbing water. There are no cracks in the tiles. How many tiles should there be per square meter. The base roof was waterproofed and currently no water is seeping into the house, only the "rivers" on the fascia.
Thank you in advance for your help.
We don't believe this is normal and one of two things has happened. The over lap of the tiles wasn't enough. Currently the overlap is 3 inches. Or the tile is too porous and is absorbing water. There are no cracks in the tiles. How many tiles should there be per square meter. The base roof was waterproofed and currently no water is seeping into the house, only the "rivers" on the fascia.
Thank you in advance for your help.