But maybe this is what you want............
exactly what you mean.............???
Tried editing my last post but the time expired by the time I finished so here goes:
1. We install each camera locally and give it a static ip address on our local network....Each camera can be accessed from "within" the network by using that local address such as :
h t t p://192.168.1.51 or whatever you use depending on your router.........
2. We then setup a FREE account with dyndns.org or with any of the many names they let you use.......like your street address or something such as "sanchez21.dyndns.org............and then you would register the IP address that your router is using AT THE TIME YOU ARE DOING THIS with sanchez21.dyndns.org........
3. Then you access the setup on your camera and or router and allow remote dns and open a port for each camera such as 81 or something............
4. Then you could go to any internet connection and connect to THAT camera by accessing:
http://sanchez21.dyndns.org:81............. and then it would go to the camera that is open on port 81 or your system............ the IP address is being monitored by dyndns.org and keeps track of it as "sanchez21" which is your "account"....
5. Your camera would or would not require a username and password once you access it depending on how you set it up..........
6. You will only need to keep your internet modem and router on at all times in order to connect via the internet to your cameras from anywhere. You do not need to leave on any computer in the house.
7. IT SHOULD be noted that when I first tried to get this way to work, I was frustrated and tried calling 3 "geeks" from Craigslist listings in Miami..........2 of them didn't even know what I was talking about and said that I needed to have a Static IP address from the internet provider in order to do this..........(WHICH IS NOT THE CASE).............the third helped me...........since I had not opened a port on the router for each camera and that was why I was having trouble.)
THE LINKS ABOVE SHOULD NOT WORK...........THEY WERE AUTOMATICALLY MADE "LINKS" BY DR1 but I was only using the address' as examples........
Hope this is helpful...........